Home
>
Product Center
>
Automatic water based fixture cleaning machine
>
Spray Fixture Cleaning Machine B-CW-700S

Product Center

All pneumatic SMT mesh cleaning machine
PCBA offline cleaning machine
Cob two fluid centrifugal cleaning machine
Automatic water based fixture cleaning machine
Tipper / solid-liquid separator
IR/die/wafer cleaning machine
Water based SMT mesh cleaning machine
AOI Cob thread inspection machine AOI
B-CW-760
Product name:

Spray Fixture Cleaning Machine B-CW-700S

number:
0
 
ONE、Equipment Overview:：
 
The equipment is suitable for the cleaning of the external surface of all kinds of workpieces, such as the cleaning of wave soldering fixture, the cleaning of reflow condenser, and the cleaning of all kinds of hardware parts after machining,after the removal of equipment parts cleaning, car accessories, various shells, boxes, etc. During the operation of the equipment, the workpiece rotates with the cleaning basket in the cleaning basket, and at the same time, the spray system high pressure spray heated cleaning fluid can make the workpiece clean in all directions.
 
TWO、Features：
 
  1、One key operation, the whole cleaning process is completed automatically without manual intervention;
  2、The equipment has a cavity to complete cleaning, rinsing and drying functions;
  3、After cleaning, the surface of the workpiece is dry and clean, which can be directly used in the later stage process, and the effect is greatly improved compared with manual cleaning;
  4、Spray pressure is adjustable, 720 degrees of all-round spray, cleaning no dead corner;
  5、The equipment has a real-time circulation and filtration system for cleaning and rinsing liquid, which greatly improves the liquid utilization efficiency;
  6、Large batch cleaning can save a lot of labor;
  7、The equipment has the advantages of low energy consumption, low noise, no pollution and friendly environment;
  8、With the use of efficient water-based cleaning agent, the liquid consumption is small and the operation cost is low.


 
THREE、Equipment cleaning process:：
 

Serial number

working procedure

mode

function

rhythm

Cleaning medium

Set the temperature

Filtration accuracy

1

Manual feeding

-

-

-

-

-

-

2

Spray cleaning

Spray0.5-0.6MP

clean

10～20min

Water based environmental cleaning agent (superior MC 920 recommended)

Room temperature ～80℃

10～25µ

3

Spray rinse

Spray0.5-0.6MP

Rinse

3～5min

pure water

Room temperature ～80℃

10µ

4

Hot air cutting drying

Hot air cutting

dry

5～10min

Hot air

Room temperature ～90℃

-



Four、Equipment parameters:
 

Total power of equipment

27KW

input voltage

AC380V  

Input frequency

50Hz

Overall dimensions of the whole equipment

1330mm(L)×1550mm(W)×1650mm(H)

Height of operation surface

1000mm

Total weight of equipment

<0.9t



Website construction: netlink technology - Shenzhen

Shenzhen ZKSMC Technology Co., Ltd.

 

Tel：+86-0755-23461395
Phone：13560775327
Fax：+86-0755-29191826
Address：Building 1, Yulu Fifth Industrial Zone, Yutang Street, Guangming New District, Shenzhen

© Copyright 2020 Shenzhen ZKSMC Technology Co., Ltd. 粤ICP备2021066739号