>
Product Center
>
Water based SMT mesh cleaning machine
>
B-CW-1000 water based screen cleaning machine
Product name:

B-CW-1000 water based screen cleaning machine

number:



1. Features of water-based stencil cleaning machine:

 
     1. Fast  super cleaning effect: The cleaning of SMT steel mesh, copper mesh, and rubber mesh can quickly and effectively clean the residual solder paste, red glue and other contaminants on the surface and hole walls after printing;
     2 、Standard water-based automatic cleaning mode:  Complete the cleaning, rinsing, and drying processes in one cleaning room, with small size and compact structure;
     3、Whole process visualization:  The cleaning room is equipped with a visual window, and the cleaning process is clear at a glance;
     4 、Wide range of applications: SMT/ SOP steel mesh, silk screen, glue printing jig, SMT scraper, large size PCBA / misprinted board;
     5 、DI water real-time resistivity cleanliness monitoring system:  Used to monitor the cleaning effect, the resistivity can be set, the resistivity control range is 0~18MΩ;
     6、Adjustable nozzle pressure and symmetrical design:   Solve the tension problem of SMT/SOP steel mesh under high pressure spray conditions during the cleaning process;
     7、Standard cleaning liquid tank heating system: The water-based process requires heating and emulsification, which greatly improves the cleaning efficiency and shortens the cleaning time;
     8、Low operating cost\Built-in filtering device can realize the recycling of solvents, using compressed air to recover the residual chemical liquid in the pipeline and pump, which can effectively save 50% of the cleaning agent;
    9、Washable oversized PCBA(800mm*800mm)
  10、High pressure fan + air knife cutting air drying: 5HP high pressure fan is used, which is more efficient (3~5 minutes) and more thorough!
  11、Full Chinese large touch screen operation interface::  Using a stable and reliable imported brand color touch screen, aiming at: solvent temperature, cleaning time, rinse times/time,
         漂Washing temperature, drying time, drying temperature, conductivity monitoring parameters, etc..., set;
 
 
2. Parameters of water-based stencil cleaning machine:
 
     1. Applicable screen size: up to 800mm(L) ×750mm(W) × 40mm(H) special size needs to be customized
      2、Liquid tank capacity:   50L* 2PCS
      3、Cleaning method: moving up and down high pressure spray
      4、Rinsing method: open-loop DI water or closed-loop chemical liquid spray
      5、Drying method: high pressure hot air cutting water (optional super model)
      6、Cleaning time: 2-5 minutes
      7、Cleaning and isolation time: 1 minute
      8、Rinsing time: 2-5 minutes
     9、Rinsing and drying time: 3-5 minutes
    10、Resistivity tester range:0--18MΩ
    11、Liquid heating temperature: room temperature~60℃
    12、Liquid tank heater power(KW):9KW
    13、Rinse tank heater power(KW): 9KW
    14、Noise: less than 50 decibels
    15、Drying temperature: room temperature--90℃
    16、Drying heater power(KW):6KW
    17、Total power:33KW


一、水基网板清洗机特点:

 
     1、迅速&超强清洁效果: SMT钢网、铜网、胶网的清洗,能迅速有效清洗印刷后表面以及孔壁残留的锡膏、红胶等污染物;
     2 、标准水基全自动清洗模式:  在一个清洗室内完成清洗、漂洗、烘干全部清洗工序,体积小,结构紧凑;
     3、全流程可视化:  清洗室装有可视化窗口,清洗过程一目了然;
     4 、应用广泛: SMT/ SOP钢网、丝网、印胶治具、SMT刮刀、大尺寸PCBA / 误印板;
     5 、DI水实时的电阻率清洁度监控系统:  用于监测清洗效果,电阻率可设定,电阻率控制范围0~18MΩ;
     6、喷嘴压力可调以及对称式设计:   解决了SMT/ SOP钢网在清洗过程中受高压力喷淋条件下的张力问题;
     7、标配的清洗液槽加热系统: 水基工艺对加温乳化的需求, 大大提升了清洗效率,缩短清洗时间;
     8、低运行成本\内置过滤装置可实现溶剂的循环使用,采用压缩空气回收管道及泵内的残留化学液,能有效节省50%清洗剂;
    9、可清洗超大尺寸PCBA(800mm*800mm)
  10、高压风机+风刀切风干燥:采用5HP高压风机,效率更高(3~5分钟)、更彻底!
  11、全中文超大触摸屏操作界面:  采用稳定可靠的进口品牌彩色触摸屏,针对:溶剂温度、清洗时间、漂洗次数/时间、
         漂洗温度、烘干时间、烘干温度、电导率监控参数等……,设定;
 
 
二、水基网板清洗机参数:
 
     1、适用网板尺寸:最大800mm(L) ×750mm(W) × 40mm(H) 特殊尺寸需订制
      2、液体槽容量:   50L* 2PCS
      3、清洗方式: 上下移动式高压喷淋
      4、漂洗方式: 开环DI水或闭环化学液喷淋
      5、干燥方式: 高压热风切水(可选超强机型)
      6、清洗时间:2-5分钟
      7、清洗隔离时间 :1分钟
      8、漂洗时间:2-5分钟
     9、漂洗干燥时间:3-5分钟
    10、电阻率测试仪范围:0--18MΩ
    11、液体加热温度:室温~60℃
    12、液体槽加热器功率(KW):9KW
    13、漂洗槽加热器功率(KW): 9KW
    14、噪音:小于50分贝
    15、烘干温度: 室温--90℃
    16、烘干加热器功率(KW):6KW
    17、总功率约:33KW